JennAir ice maker Replace Filter light flashing / Water supply and fill

JennAir ice-maker
error Replace Filter light flashing

Ice-maker / display referenceReplace Filter light flashing

A flashing Replace Filter light means the water filter needs attention. The light normally comes on after 9 months or 2,000 gallons. If it keeps flashing after a new filter, check the filter is locked, undamaged and has its O-rings, then restart the ice maker.

Also shown as Replace Filter light flashing

Last reviewed

Ice-maker / display referenceReplace Filter light flashing
Meaning
A flashing Replace Filter light means the water filter needs attention. The light normally comes on after 9 months or 2,000 gallons. If it keeps flashing after a new filter, check the filter is locked, undamaged and has its O-rings, then restart the ice maker.
Who handles it
Maintenance due
Source
Filter Light Blinking - Freestanding Ice Maker - Product Help

What JennAir ice maker Replace Filter light flashing means.

What it means

A flashing Replace Filter light means the water filter needs attention. The light normally comes on after 9 months or 2,000 gallons. If it keeps flashing after a new filter, check the filter is locked, undamaged and has its O-rings, then restart the ice maker.

What you can safely check

The light comes on after 9 months or 2,000 gallons of water use.

When to call a technician

The light stays on after a restart.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir ice maker Replace Filter light flashing: Rear of an undercounter ice maker pulled out of its cabinet, with a white inlet valve, braided supply line and a red-handled shut-off valve on the wall.
    Illustration. Follow your model’s instructions.
    Before you begin

    Check the age

    The light comes on after 9 months or 2,000 gallons of water use.

  2. Ice makers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check the filter is locked

    It must be turned to the locked position; otherwise the light keeps flashing.

  3. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 3

    Inspect for cracks or damage

    Replace a damaged filter.

  4. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 4

    Check the O-rings

    Missing or damaged O-rings mean replacing the filter. Then restart the ice maker.

Still showing Replace Filter light flashing?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

Ice maker cycle.

Conceptual Ice maker sectionWater inletEvaporator plateIce bin and bin sensorDrain pumpControl12345
  1. 1Water inlet
  2. 2Evaporator plate
  3. 4Drain pump
  4. 5Control

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

A little more context.

What does the flashing light mean on a JennAir ice maker?

It is the water filter reminder. It comes on after 9 months or 2,000 gallons of use.

Read the supporting manual

What can keep it flashing?

A filter not turned to the locked position, a cracked filter, or missing or damaged O-rings.

Read the supporting manual

The manual behind the message.

Manufacturer document

Filter Light Blinking - Freestanding Ice Maker - Product Help

JennAir Product Help (producthelp.jennair.com)

dateModified 2025-06-16; PH 10152 / PH 10152 (freestanding ice maker)

Scope: JennAir freestanding ice maker. Read from the JennAir Product Help page for the flashing filter light (PH 10152).

Here to help

Good questions.
Clear answers.

Talk to our team
When does the light come on?

After 9 months or 2,000 gallons of water use. Very hard water may need earlier replacement.

What if the filter is installed wrong?

The light will continue to flash. A wrongly seated filter can also mean low, thin or no ice.

How do I restart the ice maker?

Unplug it or turn power off at the fuse or breaker, then restore it.

What if the light remains on?

JennAir says service will need to be scheduled.

Let’s take care of it.

Something on the display?
Send us the details.