What it means
A lit Service light tells you the ice maker needs service. Power it down and up a single time with its on/off control; if the light is back afterward, a technician has to look at it.
JennAir ice maker Service light / Control board and communication
A lit Service light tells you the ice maker needs service. Power it down and up a single time with its on/off control; if the light is back afterward, a technician has to look at it.
Also shown as Service light
A lit Service light tells you the ice maker needs service. Power it down and up a single time with its on/off control; if the light is back afterward, a technician has to look at it.
Use its on/off control.
The Service light returns after one restart.
Checks you have ticked / saved in this browser

Use its on/off control.

See whether it stays out.

It helps a technician judge what changed.

One restart is the page's test. Repeating it adds nothing.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit
A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
It indicates when service is needed.
Read the supporting manualPower the ice maker down, then up again, one time.
Read the supporting manualIf the Service light turns on again, call for service.
Read the supporting manualThe model number, the date it first appeared and whether ice production changed.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2025-04-09; PH 13679 / PH 13679 (freestanding ice maker)
Scope: JennAir freestanding ice maker. Read from the JennAir Product Help page for the Service light (PH 13679).
JennAir says it indicates when service is needed.
It may. If the light turns on again, JennAir says to call for service.
The page does not name a part.
If ice is still being made, you can, but watch the light and book a visit if it returns.
Code or symptom, part, service call
A blinking Clean light means the cleaning cycle is in progress, or it was interrupted. Press Clean to resume. When the Cleaning Complete light comes on, about 70 to 90 minutes later, the cycle is finished.
When a freestanding ice maker goes quiet, look for a dirty or blocked bin sensor, a cracked or badly locked water filter, or a cleaning cycle that was cut short. Check those, level the unit and restart it. A service light that returns means a repair.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.