1c1c is the first row in JennAir's "Starts with 1c" group, and it is the one that names the touch panel (JennAir's user interface) or its wiring. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
1c1c is the first row in JennAir's "Starts with 1c" group, and it is the one that names the touch panel (JennAir's user interface) or its wiring. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
1c1c - Error Code - Range - Product Help | JennAir
What JennAir oven 1c1c means.
What it means
1c1c is the first row in JennAir's "Starts with 1c" group, and it is the one that names the touch panel (JennAir's user interface) or its wiring. The first step is a sixty-second power reset at the breaker panel; call for service if it returns.
What you can safely check
If it was running, give the cavity and the glass time to cool.
When to call a technician
1c1c comes back after the one-minute breaker reset.
Checks you have ticked / saved in this browser
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Let the oven cool first
If it was running, give the cavity and the glass time to cool. The reset happens at the breaker panel, so there is no need to open anything.
Illustration. Follow your model’s instructions.
Check 2
Reset at the breaker
Find the oven's circuit breaker, leave it off for sixty seconds, flip it on, and keep an eye on the display for a minute. JennAir prints no other owner step.
Illustration. Follow your model’s instructions.
Check 3
Wipe the panel, oven off
With the oven off and cool, wipe the glass with a damp cloth. Grease or moisture on a touch panel is our guess, not something JennAir names.
Illustration. Follow your model’s instructions.
Check 4
Press a few keys
After the reset, try several keys and note which ones are slow or dead. The technician can use that.
Still showing 1c1c?
Send the model and the checks you have already run, then begin your request from this page.
JennAir's range (PH 12887) and wall-oven (PH 13261) pages list the touch panel (JennAir's user interface) or its wiring as the possible problem. It does not say which part is responsible, and it names no repair.
Let the oven cool, then run the sixty-second power reset at the breaker panel and keep an eye on the display for a minute. After that, wipe the glass with the oven off and try a few keys. The wipe is our idea; the page only gives the reset.
The next row, 1c2c, lists the touch controls and the wiring, which is the same kind of suspect. JennAir does not say what the last digit changes, so treat the two as one keypad-side warning and go by the number on your display.
If the reset clears it and the keys respond normally, ordinary cooking is reasonable. If the code returns, stop using the oven and call for service. JennAir gives no further owner step.
Applies to: freestanding range and wall oven. Source: JennAir Product Help PH 12887, PH 13261. The pages print one cause line and the reset; everything else here is our guidance.