What it means
If a connected professional-style JennAir range is blinking its controls, the JennAir app can show why. Open the app, go to Settings, then Service and Support, then Appliance Error. The range must be registered in the app first.
JennAir oven Controls are blinking (connected range) / Professional-style range light
If a connected professional-style JennAir range is blinking its controls, the JennAir app can show why. Open the app, go to Settings, then Service and Support, then Appliance Error. The range must be registered in the app first.
Also shown as Controls are blinking (connected range)
If a connected professional-style JennAir range is blinking its controls, the JennAir app can show why. Open the app, go to Settings, then Service and Support, then Appliance Error. The range must be registered in the app first.
Blinking controls are not an emergency by themselves, but any gas smell or smoke means shut off the burners and ventilate before anything else.
The app lists an error that will not clear.
Checks you have ticked / saved in this browser

Blinking controls are not an emergency by themselves, but any gas smell or smoke means shut off the burners and ventilate before anything else.

In the JennAir app choose Settings, then Service and Support, then Appliance Error. If no errors are stored, that section is not shown.

Tap the error for details. JennAir then points you to its error-code section for the next step.

If it is not connected, the app cannot tell you anything. Set that up when the range is calm, and note the code from the LEDs meanwhile.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
JennAir says blinking is a sign something needs attention, and a registered range reports the reason to the mobile app.
Read the supporting manualSettings, then Service and Support, then Appliance Error. If any errors exist, select one for further information.
Read the supporting manualThen use the LED reading rule from the blinking-light pages to find the F and E digits. The app route only applies to a registered range.
Read the supporting manualIf the app lists an error you cannot clear with the page's steps, or the controls keep blinking, book a technician with the code in hand.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2025-04-15; PH 13086 / PH 13086 (professional-style range)
Scope: connected professional-style range only. Read from JennAir Product Help PH 13086 (2025 edition).
On a connected professional-style range it means an error is present. The JennAir app can list it under Appliance Error.
JennAir says it only appears when errors exist. No option means the app sees none, so check the LEDs on the range.
The range has to be connected and registered in the JennAir app for this route to work.
The page says nothing about danger. Use normal caution and stop cooking if you notice anything unusual.
Code or symptom, part, service call
A JennAir professional-style range shows codes by lights. When the Wi-Fi LED and the Remote LED flash, an F#E# code is present: the Wi-Fi LED is the F part, the Remote LED is the E part, and the Mode knob's eight LEDs flash once per unit. JennAir's example: F5E3 is five flashes, then three.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.