F3 E1 reads a lower-oven temperature sensor problem on a double wall oven; on a freestanding range it is a general oven sensor, control or wiring message, and a professional-style range only gets a reset. Cancel it, cycle the power, then see if it comes back.
F3 E1 reads a lower-oven temperature sensor problem on a double wall oven; on a freestanding range it is a general oven sensor, control or wiring message, and a professional-style range only gets a reset. Cancel it, cycle the power, then see if it comes back.
F3E1 Error Code - Commercial Range - Product Help | JennAir
What JennAir oven F3E1 means.
What it means
F3 E1 reads a lower-oven temperature sensor problem on a double wall oven; on a freestanding range it is a general oven sensor, control or wiring message, and a professional-style range only gets a reset. Cancel it, cycle the power, then see if it comes back.
What you can safely check
On a professional-style range, turn the temperature knob to OFF.
When to call a technician
F3 E1 returns after the reset, or the lower oven bakes unevenly.
Checks you have ticked / saved in this browser
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Cancel the error at the control
On a professional-style range, turn the temperature knob to OFF. On other products, press CANCEL or OFF and leave the oven idle.
Illustration. Follow your model’s instructions.
Check 2
Cycle the power with the range cool
Use one minute at the breaker for a wall oven or range; the newer pro-range page asks for five minutes with power disconnected.
Illustration. Follow your model’s instructions.
Check 3
Say which cavity reported it
On a double wall oven the page names the lower oven. If the display does not say, run each cavity alone.
Illustration. Follow your model’s instructions.
Check 4
Watch the next preheat
A second code during a fresh preheat tells you the reset did not help. Write down how long it took to appear.
Still showing F3E1?
Send the model and the checks you have already run, then begin your request from this page.
A wall oven row names one of the sensors, the control, or the wiring. The range row names a temperature sensor, the control or the wiring without choosing a cavity.
Both pro-range pages list resets only. The 2024 page tells you to turn the knob to OFF, and the 2025 page asks for the control panel to be without power for five minutes.
A sensor feeds the control the oven's real temperature. If it misreads, results can drift even without a code on screen, so poor browning plus F3 E1 is worth mentioning when you book.
Not necessarily. JennAir lists one of the sensors, the control, or the wiring as possibilities. A technician measures before anything is replaced.
Can I run only the upper oven?
The pages do not forbid it, but they do not endorse it either. If the upper cavity heats normally, it is a reasonable short-term workaround while you book.
What if F3 E1 appears right after a power outage?
Do the reset steps first. A momentary outage can leave a control confused, and a clean power cycle sometimes clears it.
Is F3 E1 written differently on some pages?
JennAir writes F3 E1 with a space on range and wall oven pages and F3E1 on pro-range pages. They are the same code.