F3 on a JennAir freestanding range or wall oven points at the oven control or its wiring, and on a steam wall oven the page only asks for a breaker reset. Switch the oven breaker off for a single minute, switch it back on, then watch the display for another minute.
F3 on a JennAir freestanding range or wall oven points at the oven control or its wiring, and on a steam wall oven the page only asks for a breaker reset. Switch the oven breaker off for a single minute, switch it back on, then watch the display for another minute.
F3 on a JennAir freestanding range or wall oven points at the oven control or its wiring, and on a steam wall oven the page only asks for a breaker reset. Switch the oven breaker off for a single minute, switch it back on, then watch the display for another minute.
What you can safely check
Take food out only if the oven is cool enough to handle.
When to call a technician
F3 returns after the one-minute reset, or comes back during the first cycle.
Checks you have ticked / saved in this browser
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Let the oven cool and stop cooking
Take food out only if the oven is cool enough to handle. Do not open the breaker panel with wet hands or while standing in water.
Illustration. Follow your model’s instructions.
Check 2
Switch the oven breaker off for a single minute
Use the circuit that feeds the range or wall oven, not the kitchen lighting circuit. Count a full minute before restoring power.
Illustration. Follow your model’s instructions.
Check 3
Start a short cycle and watch
On the steam oven page JennAir adds starting a cycle after power returns. Run a short bake or steam program and watch the display for a minute.
Illustration. Follow your model’s instructions.
Check 4
Note which JennAir product you own
Freestanding range, wall oven and steam oven rows differ. Write down which one you have and whether a letter E and a digit follow the F3.
Still showing F3?
Send the model and the checks you have already run, then begin your request from this page.
JennAir prints bare F3 for three product types: a freestanding range, a wall oven and a steam oven. The range and wall oven rows name the oven control; the steam row names nothing.
The control reads your knob or touch settings and switches the heating circuits. When it or the wiring that serves it misbehaves, the display can lock onto a code like this one, so a clean power cycle is the first fair test.
How is bare F3 different from F3 E0 through F3 E9?
The lettered versions add an E number that points at a specific sensor, probe or cavity. Bare F3 carries no such pointer, so read the display for any trailing characters before you decide which page fits.
JennAir asks you to monitor the oven for one minute after power returns. A premium built-in that stays quiet for that minute and then heats normally has cleared it; a return of the code means the cause is still there.
No. The range and wall oven pages name the oven control or wiring, while the steam oven page lists only a breaker reset and no cause. Match the page to your product.
Can I keep baking if F3 clears after a reset?
A single clear after a reset is not a diagnosis. Use the oven gently, and book a visit if the code comes back, because the control may be failing slowly.
Why does JennAir want a cycle started after the reset?
On the steam oven page, starting a cycle after power returns shows whether the control accepts normal work. If the code reappears during the cycle, the reset did not help.
Should I replace the oven control myself?
No. The control sits behind panels on a live circuit, and a wrong board on a built-in can leave the oven unusable. A technician tests the wiring and the control first.