What it means
F6 E6 asks for a restart on a JennAir professional-style range and names the upper oven appliance manager control on a wall oven. Cancel the error, restart power, and run a short bake in the upper cavity.
JennAir oven F6E6 / Appliance manager
F6 E6 asks for a restart on a JennAir professional-style range and names the upper oven appliance manager control on a wall oven. Cancel the error, restart power, and run a short bake in the upper cavity.
Also shown as F6E6
F6 E6 asks for a restart on a JennAir professional-style range and names the upper oven appliance manager control on a wall oven. Cancel the error, restart power, and run a short bake in the upper cavity.
Pro range: turn the temperature knob to OFF.
F6 E6 returns after a restart.
Checks you have ticked / saved in this browser

Pro range: turn the temperature knob to OFF. Wall oven: press CANCEL.

Five minutes with power disconnected on the 2025 pro page, or one minute at the breaker on a wall oven.

Choose a modest temperature and watch for a minute.

That tells a technician where to begin.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
JennAir ranges and wall ovens with several cavities use an appliance manager that coordinates the oven controls.
Read the definitionOn a double wall oven it is the top one. The E6 wall oven page names that cavity's appliance manager control or the wiring that serves it.
Read the supporting manualNeither edition lists a part. The 2024 page tells you to turn the knob to OFF, and the 2025 page asks for the control panel to be without power for five minutes.
Read the supporting manualE9 names the lower oven appliance manager on a wall oven. Together they split the stack by cavity.
Read the supporting manualThen the cause may sit above a single cavity, such as a shared supply or converter. Say so when you book.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2025-10-01; PH 14157 / PH 14157 (professional-style range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-05; PH 13104 / PH 13104 (professional-style range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-19; PH 13373 / PH 13373 (wall oven)
PH 14157, 13104, 13373: F6E6, pro-range/wall-oven.
On the wall oven page it names the upper oven, so a single oven would not show it. Pro ranges treat it as a restart item.
Try it. If it bakes normally, it can carry the load.
The pages do not say. It suggests each cavity has its own coordinating board.
Sometimes. A repeat means the manager control or wiring needs a technician.
Code or symptom, part, service call
F6 E7 names the microwave appliance manager or its wiring on a JennAir combination wall oven. Reset the breaker for about a minute, then check whether the microwave side starts.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
JennAir ranges and wall ovens with several cavities use an appliance manager that coordinates the oven controls. The F6 family names it, sometimes with the converter control or the user interface. The pages admit there are many possible reasons, then give one reset.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.