What it means
F6 EA names the user interface on a JennAir freestanding range, and on a wall oven the user interface control sensing an over temperature condition. Let the oven cool, then reset the breaker for about a minute.
JennAir oven F6EA / User interface
F6 EA names the user interface on a JennAir freestanding range, and on a wall oven the user interface control sensing an over temperature condition. Let the oven cool, then reset the breaker for about a minute.
Also shown as F6EA
F6 EA names the user interface on a JennAir freestanding range, and on a wall oven the user interface control sensing an over temperature condition. Let the oven cool, then reset the breaker for about a minute.
The wall oven wording ties to over temperature, so give it time.
F6 EA returns when the oven is cool.
Checks you have ticked / saved in this browser

The wall oven wording ties to over temperature, so give it time.

Clear anything blocking the oven's vents.

Restore power.

See if the panel responds.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit
A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
The user interface is the keypad or touch panel you press.
Read the definitionIt says the user interface control may be sensing an over temperature condition, in addition to the wiring. That makes heat around the panel a plausible factor.
Read the supporting manualThe user interface or the wiring, with no temperature wording.
Read the supporting manualA control sensing excess heat may stay in error until it cools. That is our reading of the wall oven wording.
Read the supporting manualIf the code returns when cool, book a visit.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-08-16; PH 12986 / PH 12986 (range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-08; PH 13377 / PH 13377 (wall oven)
PH 12986, 13377: F6EA, range/wall-oven.
JennAir's pages do not say. The code is printed as F6 EA, with the last character shown as the letter A, and no hexadecimal meaning is given, so read it simply as the name of this code.
The pages do not name venting as a cause. The wall oven wording does mention an over temperature condition at the control, so clearing anything that blocks the vents and letting the oven cool before the reset is a sensible step.
Both name the user interface on a JennAir range, so they read alike. F6 EA adds the wall oven wording about the user interface control sensing an over temperature condition.
JennAir prints no safety warning for it. Let the oven cool and reset the breaker for about a minute; if the code returns while the oven is cool, book a visit.
Code or symptom, part, service call
F6 E9 asks for a restart on a professional-style range and names the lower oven appliance manager on a wall oven. Cancel, restart power, and test the lower cavity with a short bake.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
The user interface is the keypad or touch panel you press. JennAir lists it in the F2 family (F2 E0 to F2 E6), where F2 E1 often means a key is stuck or held too long. The help pages suggest checking cooktop grates on some ranges, then a one-minute reset.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.