What it means
F6 E9 asks for a restart on a professional-style range and names the lower oven appliance manager on a wall oven. Cancel, restart power, and test the lower cavity with a short bake.
JennAir oven F6E9 / Appliance manager
F6 E9 asks for a restart on a professional-style range and names the lower oven appliance manager on a wall oven. Cancel, restart power, and test the lower cavity with a short bake.
Also shown as F6E9
F6 E9 asks for a restart on a professional-style range and names the lower oven appliance manager on a wall oven. Cancel, restart power, and test the lower cavity with a short bake.
Knob to OFF on a pro range.
F6 E9 returns after a restart.
Checks you have ticked / saved in this browser

Knob to OFF on a pro range.

Five minutes on the 2025 pro page; one minute at the breaker for a wall oven.

Choose a modest temperature.

It may be fine.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
JennAir ranges and wall ovens with several cavities use an appliance manager that coordinates the oven controls.
Read the definitionThe lower oven appliance manager or the wiring. It is the counterpart to E6, which names the upper cavity.
Read the supporting manualNo part is named. Both editions give only a restart.
Read the supporting manualNot stated. Test, and rely on the upper cavity if the lower one repeats the code.
Read the supporting manualAfter one restart that does not hold.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2025-10-01; PH 14158 / PH 14158 (professional-style range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-05; PH 13105 / PH 13105 (professional-style range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-08; PH 13376 / PH 13376 (wall oven)
PH 14158, 13105, 13376: F6E9, pro-range/wall-oven.
On the wall oven page, yes: it names the lower oven appliance manager, the counterpart to E6 for the upper cavity. The professional-style range pages give only a restart and name no part.
Possibly. The page does not say whether the upper oven is affected, so test it, and plan the meal around the upper cavity if the lower one repeats the code.
A short bake at a modest temperature shows whether the lower oven manager works under load after the restart. Watch whether the code comes back during it.
Yes. JennAir has a 2025 professional-style range page and an older one, and both give only a restart with no part named. The wall oven page is the one that names the lower oven appliance manager.
Code or symptom, part, service call
F6 EA names the user interface on a JennAir freestanding range, and on a wall oven the user interface control sensing an over temperature condition. Let the oven cool, then reset the breaker for about a minute.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
JennAir ranges and wall ovens with several cavities use an appliance manager that coordinates the oven controls. The F6 family names it, sometimes with the converter control or the user interface. The pages admit there are many possible reasons, then give one reset.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.