What it means
F0 (also printed F00) on a JennAir electric or induction cooktop means an object, liquid or soil is pressing on the control panel. Remove anything left on the control area, wipe off debris, and reset the power for one minute.
JennAir cooktop F0 / Touch controls
F0 (also printed F00) on a JennAir electric or induction cooktop means an object, liquid or soil is pressing on the control panel. Remove anything left on the control area, wipe off debris, and reset the power for one minute.
Also shown as F0
F0 (also printed F00) on a JennAir electric or induction cooktop means an object, liquid or soil is pressing on the control panel. Remove anything left on the control area, wipe off debris, and reset the power for one minute.
Wipe the glass only when the zones are off and cool.
F0 returns on a clean, dry, empty panel.
Checks you have ticked / saved in this browser

A pan, cloth, spill or utensil resting on the touch controls can read as a held key.

JennAir says to wipe debris from the control panel surface.

If wiping does not clear it, cut the cooktop breaker for sixty seconds, restore power, and see whether the panel behaves for the next minute.

After the reset, check the cooktop works normally.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit
A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
An object, liquid or soil is pressing on the control panel.
Read the supporting manualRemove any objects left on the control area and wipe debris from the control panel surface.
Read the supporting manualIf wiping does not clear it, cut the cooktop breaker for sixty seconds, restore power, and see whether the panel behaves for the next minute.
Read the supporting manualIf a clean, empty panel still reads pressure after the reset, the touch control may be stuck or damaged. JennAir does not name a part.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2022-03-24; PH 11892 / PH 11892 (electric and induction cooktop)
Scope: JennAir electric and induction cooktops (one shared page for F0 or F00, PH 11892).
JennAir lists them on one page, titled F0 or F00, with one set of steps.
The page names an object, liquids or soils. A damp cloth or pot handle resting on the glass would qualify.
Try cleaning first. If F0 persists, cut the cooktop breaker for sixty seconds and restore power.
When F0 returns with a clear, clean panel. That points at the touch control or its wiring.
Code or symptom, part, service call
F40 on a JennAir electric or induction cooktop may involve the touchpad (user interface), the board that powers the cooktop, or the wiring. Reset the breaker for one minute and watch the cooktop.
Clicking with no flame points to a short list: Control Lockout after a power loss, a closed gas shut-off, a knob not turned to Ignite, moisture, or clogged ports. On a first start JennAir says to turn one knob for a moment so air leaves the line.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.