Read the whole display
Give the exact code, including any E or letter, and whether it is an induction or radiant cooktop.
Model-specific code library
Nine cooktop codes are decoded from JennAir Product Help: F0, F21, F25, F36, F40, F42, F61, F0E1 and E2. They cover touch control and power boards, overheat, cookware detection and the supply.
E2 on a JennAir induction cooktop means the cooktop has overheated. The control panel switches off because the electronics reached too high a temperature. Wait for the cooktop to cool before using it, and check you were not heating an empty pan.
Read the E2 checks9 researched cooktop codes. Each model reads codes its own way, so go by your own manual.
E2 on a JennAir induction cooktop means the cooktop has overheated. The control panel switches off because the electronics reached too high a temperature. Wait for the cooktop to cool before using it, and check you were not heating an empty pan.
Cool down, then resetF0 (also printed F00) on a JennAir electric or induction cooktop means an object, liquid or soil is pressing on the control panel. Remove anything left on the control area, wipe off debris, and reset the power for one minute.
Owner checks firstF0E1 on a JennAir induction cooktop asks whether the cookware is right. Only ferromagnetic pans work, and the pot must be a suitable size and centered. Press On/Off twice to clear the code, then try another zone or pan.
Owner checks firstF21 on a JennAir radiant, electric or induction cooktop points to the cooktop overheating. Verify the installation, let the cooktop cool for about five minutes, then switch the breaker off for one minute and on again.
Cool down, then resetF25 on a JennAir electric or induction cooktop says there is a problem with the power supply to the cooktop. Switch the breaker off for one minute and on again. If it reoccurs, JennAir says to contact a qualified electrician.
Reset, then electricianF36 on a JennAir induction cooktop may point at a coil temperature sensor. Switch the breaker off for one minute, switch it back on, and watch the cooktop for one minute.
Reset, then bookF40 on a JennAir electric or induction cooktop may involve the touchpad (user interface), the board that powers the cooktop, or the wiring. Reset the breaker for one minute and watch the cooktop.
Reset, then bookF42 on a JennAir electric or induction cooktop may involve the board that powers the cooktop, or its wiring. Switch the breaker off for one minute, back on, and watch the cooktop for one minute.
Reset, then bookF61 on a JennAir electric or induction cooktop may involve the touch control (user interface), the power module, the wiring, or the electrical supply. Reset the breaker for one minute.
Reset, then book
Nine cooktop codes are decoded from JennAir Product Help: F0, F21, F25, F36, F40, F42, F61, F0E1 and E2. They cover touch control and power boards, overheat, cookware detection and the supply.
These pages cover JennAir electric and induction cooktops. Gas cooktops are not covered, and F37 is read only as part of the F36 page.
Give the exact code, including any E or letter, and whether it is an induction or radiant cooktop.
Turn the cooktop off at its breaker before any check beyond a reset. Boards and supply wiring are for a technician.
Clicking with no flame points to a short list: Control Lockout after a power loss, a closed gas shut-off, a knob not turned to Ignite, moisture, or clogged ports. On a first start JennAir says to turn one knob for a moment so air leaves the line.
For a cooktop that does nothing, JennAir starts with the controls, the control or cooktop lock, the cord and the breaker. On an electric cooktop, turn the breaker off for one minute and back on. On a gas cooktop, also confirm that gas reaches it and the shut-off valve stands open.
Go by the instructions for your own model. See how we research these pages.
These pages cover JennAir electric and induction cooktops. Gas cooktops are not covered, and F37 is read only as part of the F36 page.
Take a clear photo of the whole cooktop display and of the model label. Add what the appliance was doing when the message came up, and do not borrow the explanation for a different appliance.
An old search phrase is no substitute for manufacturer evidence. When our cooktop documents leave a message undecoded, we show the name only and send you toward help, with no part or cause attached.
Browse the manufacturer documents in this cooktop library and hold the models on their covers up against your label. Another model needs instructions of its own.