What it means
F61 on a JennAir electric or induction cooktop may involve the touch control (user interface), the power module, the wiring, or the electrical supply. Reset the breaker for one minute.
JennAir cooktop F61 / Touch control and power module
F61 on a JennAir electric or induction cooktop may involve the touch control (user interface), the power module, the wiring, or the electrical supply. Reset the breaker for one minute.
Also shown as F61
F61 on a JennAir electric or induction cooktop may involve the touch control (user interface), the power module, the wiring, or the electrical supply. Reset the breaker for one minute.
Four possible causes include live wiring and supply.
F61 returns after the reset.
Checks you have ticked / saved in this browser

Turn the breaker off for a minute and back on, then use the touch controls and one zone while you wait out a minute.

Other appliances on the same circuit give a clue about the electrical supply.

See whether they respond normally after the reset.

Note the model number and when F61 appeared.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit
A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
Four items are listed: the touch control, the power module, the wiring and the electrical supply.
Read the supporting manualTurn the breaker off for a minute and back on, then use the touch controls and one zone while you wait out a minute.
Read the supporting manualThe cooktop cannot say which of four items is the cause, so the page lists them together.
Read the supporting manualWhen F61 returns after the reset. Mention any breaker trips as well.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2022-03-24; PH 11918 / PH 11918 (electric and induction cooktop)
Scope: JennAir electric and induction cooktops (PH 11918).
The touch control, the power module, the wiring or the electrical supply may be the problem.
F25 is about the power supply only. F61 lists the supply along with the touch control and power module.
It is the page's only step. If F61 returns, a technician has to find which item it is.
Not from the display. The page lists four possibilities.
Code or symptom, part, service call
F25 on a JennAir electric or induction cooktop says there is a problem with the power supply to the cooktop. Switch the breaker off for one minute and on again. If it reoccurs, JennAir says to contact a qualified electrician.
Clicking with no flame points to a short list: Control Lockout after a power loss, a closed gas shut-off, a knob not turned to Ignite, moisture, or clogged ports. On a first start JennAir says to turn one knob for a moment so air leaves the line.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.