What it means
F40 on a JennAir electric or induction cooktop may involve the touchpad (user interface), the board that powers the cooktop, or the wiring. Reset the breaker for one minute and watch the cooktop.
JennAir cooktop F40 / Touchpad and control board
F40 on a JennAir electric or induction cooktop may involve the touchpad (user interface), the board that powers the cooktop, or the wiring. Reset the breaker for one minute and watch the cooktop.
Also shown as F40
F40 on a JennAir electric or induction cooktop may involve the touchpad (user interface), the board that powers the cooktop, or the wiring. Reset the breaker for one minute and watch the cooktop.
Touchpads and boards share one circuit with household voltage.
F40 returns after the reset.
Checks you have ticked / saved in this browser

Take power off at the breaker for one minute and restore it; JennAir then asks you to verify cooktop operation, so try the touch keys.

This is a quick look, not a repair; JennAir gives no cleaning step for F40.

See whether the touch keys respond after the reset.

Record F40 and what you pressed just before.
Send the model and the checks you have already run, then begin your request from this page.
Book a visitA simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
The power control board is the circuit board that feeds the elements in a JennAir cooktop, electric or induction.
Read the definitionThere may be a problem with the touchpad, the cooktop power control board, or the associated wiring.
Read the supporting manualTake power off at the breaker for one minute and restore it; JennAir then asks you to verify cooktop operation, so try the touch keys.
Read the supporting manualF42 mentions the power board and wiring but not the touchpad.
Read the supporting manualWhen it returns after a reset. The page names the possible parts but not which one has failed.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2022-03-24; PH 11910 / PH 11910 (electric and induction cooktop)
Scope: JennAir electric and induction cooktops (PH 11910).
The user interface (touchpad), the board that powers the cooktop, or the wiring may be the problem.
F42 lists the power board and wiring only. F40 adds the touchpad.
Only the reset. Boards and wiring need a technician.
No. If F40 returns, book a visit.
Code or symptom, part, service call
F42 on a JennAir electric or induction cooktop may involve the board that powers the cooktop, or its wiring. Switch the breaker off for one minute, back on, and watch the cooktop for one minute.
Clicking with no flame points to a short list: Control Lockout after a power loss, a closed gas shut-off, a knob not turned to Ignite, moisture, or clogged ports. On a first start JennAir says to turn one knob for a moment so air leaves the line.
The power control board is the circuit board that feeds the elements in a JennAir cooktop, electric or induction. Two codes name it: F42 lists the board and its wiring, and F40 lists the touchpad as well. The only step JennAir gives is a sixty-second power-down.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.