F3 E3 points at the oven temperature sensor on JennAir ranges and wall ovens. On a professional-style range, push the meat probe in fully, using an oven mitt, and then reset; the app version asks for a one-minute disconnect and a refresh.
F3 E3 points at the oven temperature sensor on JennAir ranges and wall ovens. On a professional-style range, push the meat probe in fully, using an oven mitt, and then reset; the app version asks for a one-minute disconnect and a refresh.
F3E3 Error Code - Commercial Range - Product Help | JennAir
What JennAir oven F3E3 means.
What it means
F3 E3 points at the oven temperature sensor on JennAir ranges and wall ovens. On a professional-style range, push the meat probe in fully, using an oven mitt, and then reset; the app version asks for a one-minute disconnect and a refresh.
What you can safely check
On a professional-style range the 2025 page tells you to make sure the probe is fully plugged in.
When to call a technician
F3 E3 returns after the probe is seated and power is cycled.
Checks you have ticked / saved in this browser
Safe checks, in order.
0 of 4 checks done
Illustration. Follow your model’s instructions.
Before you begin
Use an oven mitt and seat the meat probe
On a professional-style range the 2025 page tells you to make sure the probe is fully plugged in. Do it only when the oven is cool or with a mitt.
Illustration. Follow your model’s instructions.
Check 2
Cancel and power cycle
The older pro page: knob to OFF. The newer one: five minutes without power. Wall ovens and ranges: breaker off one minute.
Illustration. Follow your model’s instructions.
Check 3
If the app shows F3E3
Disconnect power for a minute, reconnect, then refresh the app. Repeat only once.
Illustration. Follow your model’s instructions.
Check 4
Remove the probe and test
If the code is gone with the probe out, the probe or its jack is the suspect. Tell the technician.
Still showing F3E3?
Send the model and the checks you have already run, then begin your request from this page.
No. On professional-style ranges the pages ask about the meat probe. On a freestanding range and a wall oven the printed line names the oven temperature sensor, with the control on wall ovens.
A separate pro-range page covers the app. It asks for power to be removed for a minute, restored, and the app refreshed; if the code stays, it asks for service.
Why would the probe trigger a temperature sensor code?
The probe jack feeds a temperature reading to the control. A half-seated plug can read as an open circuit. That is general reasoning, but it fits why JennAir asks for the probe to be seated.