What it means
F3 E4 on a JennAir freestanding range or wall oven is usually a dislodged meat probe, and on some wall ovens a roll-out power attachment that has come unplugged. Reseat the probe or attachment, then reset at the breaker for 60 seconds.
JennAir oven F3E4 / Meat probe
F3 E4 on a JennAir freestanding range or wall oven is usually a dislodged meat probe, and on some wall ovens a roll-out power attachment that has come unplugged. Reseat the probe or attachment, then reset at the breaker for 60 seconds.
Also shown as F3E4
F3 E4 on a JennAir freestanding range or wall oven is usually a dislodged meat probe, and on some wall ovens a roll-out power attachment that has come unplugged. Reseat the probe or attachment, then reset at the breaker for 60 seconds.
The probe receptacle sits inside the cavity.
F3 E4 returns with the probe and attachment seated and the breaker reset done.
Checks you have ticked / saved in this browser

The probe receptacle sits inside the cavity. Wait until the oven is cool or use a mitt.

Push it all the way into the receptacle. JennAir says its location varies, so check your Owner's Manual.

If a roll-out rack with a power attachment was in use, pull the rack out, make sure the attachment is in the right place, and push it back until a tone sounds.

Switch on again and monitor the oven for a minute.
Send the model and the checks you have already run, then begin your request from this page.
Book a visitA simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
Several JennAir F3 and F8 codes come from the meat probe.
Read the definitionBoth are checks, not parts. The range page asks about the meat probe in its receptacle. The wall oven page adds a power attachment on some models that may have unplugged.
Read the supporting manualThe wall oven page says to roll out the rack, make sure the attachment is where it belongs, and push the roll-out back firmly. A tone sounds when the rack is in place.
Read the supporting manualOften not. The pages ask for physical checks before any reset, so work through those checks before any reset. If everything is seated and the code stays, the receptacle or the control is the suspected trouble spot.
Read the supporting manualSay whether a probe or attachment was in use, and which of them you reseated. That narrows the search quickly.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-08-16; PH 12972 / PH 12972 (range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2025-06-02; PH 13338 / PH 13338 (wall oven)
PH 12972, 13338: F3E4, range/wall-oven.
JennAir lists a dislocated probe as one cause on ranges and wall ovens. Seat it fully and the code can clear.
JennAir says the location varies by model and points to the Owner's Manual. It is usually inside the oven cavity.
The attachment wording applies only to models that have it. Skip that step and do the probe check and reset.
No. E3 names the temperature sensor and, on a pro range, asks about the probe. E4 is the dedicated probe or attachment row on ranges and wall ovens.
Code or symptom, part, service call
F3 on a JennAir freestanding range or wall oven points at the oven control or its wiring, and on a steam wall oven the page only asks for a breaker reset. Switch the oven breaker off for a single minute, switch it back on, then watch the display for another minute.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
Several JennAir F3 and F8 codes come from the meat probe. The pages ask you to confirm the probe is seated in its receptacle, and on some wall ovens to check a power attachment on the roll-out rack. These are quick owner checks before any reset.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.