What it means
F6 E2 appears only in the wall oven tables: JennAir names the appliance manager control, the converter control or the wiring. Cycle the breaker for a single minute, restore power, and watch the display for another minute.
JennAir oven F6E2 / Appliance manager
F6 E2 appears only in the wall oven tables: JennAir names the appliance manager control, the converter control or the wiring. Cycle the breaker for a single minute, restore power, and watch the display for another minute.
Also shown as F6E2
F6 E2 appears only in the wall oven tables: JennAir names the appliance manager control, the converter control or the wiring. Cycle the breaker for a single minute, restore power, and watch the display for another minute.
Let the oven rest while you reach the breaker panel.
F6 E2 returns after the reset.
Checks you have ticked / saved in this browser

Let the oven rest while you reach the breaker panel.

Use the circuit that serves this oven, then restore it.

See whether one cavity or both misbehave after power returns.

A dead keypad, a wrong clock or a fan running at idle all help a technician.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
JennAir ranges and wall ovens with several cavities use an appliance manager that coordinates the oven controls.
Read the definitionOnly on the wall oven page, PH 13369. A freestanding range has no E2 row in this series.
Read the supporting manualIt coordinates oven functions at system level. On a double or combination oven it also links the cavities, so a problem there can look like several small ones.
Read the supporting manualA converter changes the supply into the low voltages electronics need. JennAir lists it beside the manager and does not say which is likelier.
Read the supporting manualIf a reset holds, carry on and note the date. If the code returns, book a visit rather than resetting again and again.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-18; PH 13369 / PH 13369 (wall oven)
PH 13369: F6E2, wall-oven.
The wording matches, so the checks are the same. The digit is not explained.
Test it after the reset. A dead keypad is useful information for a technician.
No. Control boards are live-wired and model-specific.
The page does not say. Mention any recent outage when you book.
Code or symptom, part, service call
F6 E3 repeats the self-clean overheating message on a professional-style range and lists the appliance manager on a range, with the converter control on a wall oven. Let the oven cool, then restart power.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
JennAir ranges and wall ovens with several cavities use an appliance manager that coordinates the oven controls. The F6 family names it, sometimes with the converter control or the user interface. The pages admit there are many possible reasons, then give one reset.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.