What it means
F6 E8 lists the microwave appliance manager control or its wiring on a JennAir combination wall oven. Reset at the breaker for about a minute and test the microwave with a cup of water.
JennAir oven F6E8 / Microwave (combination oven)
F6 E8 lists the microwave appliance manager control or its wiring on a JennAir combination wall oven. Reset at the breaker for about a minute and test the microwave with a cup of water.
Also shown as F6E8
F6 E8 lists the microwave appliance manager control or its wiring on a JennAir combination wall oven. Reset at the breaker for about a minute and test the microwave with a cup of water.
Never test a microwave empty or with metal inside.
F6 E8 returns after the reset.
Checks you have ticked / saved in this browser

Never test a microwave empty or with metal inside.

Restore power.

Thirty seconds is enough.

Does the code reappear on start or only later?
Send the model and the checks you have already run, then begin your request from this page.
Book a visit

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
JennAir's wording includes the word control. The printed page reads like E7, so the practical checks are the same.
Read the supporting manualA control problem that appears at start suggests a different path than one that appears after minutes of running. We suggest noting it; JennAir does not.
Read the supporting manualThe page names the microwave side. Test the oven with a short bake.
Read the supporting manualIf it holds, continue and watch. If not, book.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-08; PH 13375 / PH 13375 (wall oven)
PH 13375: F6E8, wall-oven.
The pages give no ranking. F6 E8 reads like E7 apart from the word control, so the checks are the same: a breaker reset, then a short cup-of-water test.
JennAir does not explain why there are two codes. The only visible difference is the word control in the E8 wording, so we treat the checks as the same for both.
Yes, once the oven is cool. Clear the cavity of food and containers before the test run, since the cup of water should be the only thing inside.
Mention any odd fan noise to the technician. The page lists only the microwave appliance manager control or its wiring, so a fan sound is not a printed clue but is worth reporting.
Code or symptom, part, service call
F6 E9 asks for a restart on a professional-style range and names the lower oven appliance manager on a wall oven. Cancel, restart power, and test the lower cavity with a short bake.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.