What it means
FC E3 matches FC E1 and E2 on a JennAir range or wall oven: the oven could not connect to the router. Check the signal where the oven stands and restart the router before touching the oven.
JennAir oven FCE3 / Wi-Fi connection
FC E3 matches FC E1 and E2 on a JennAir range or wall oven: the oven could not connect to the router. Check the signal where the oven stands and restart the router before touching the oven.
Also shown as FCE3
FC E3 matches FC E1 and E2 on a JennAir range or wall oven: the oven could not connect to the router. Check the signal where the oven stands and restart the router before touching the oven.
Use a phone or tablet.
FC E3 returns despite a strong signal at the oven.
Checks you have ticked / saved in this browser

Use a phone or tablet. Walls, cabinets and a metal oven body all weaken Wi-Fi.

Two minutes off, then on.

JennAir lists both options for weak signal.

Breaker off for two minutes, on again.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
The Wi-Fi module links a connected JennAir oven to your router.
Read the definitionA wall oven sits inside cabinetry with a metal shell around its electronics. That can swallow signal, so a router that works in the living room may struggle in the kitchen.
Read the supporting manualFor a weak signal, relocate the router, use a compatible signal extender or ask your internet provider.
Read the supporting manualThe wording is the same. The digit is not explained, so rely on the same checks.
Read the supporting manualWhen the signal is strong at the oven and the code still comes back.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-08-16; PH 12998 / PH 12998 (range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-08; PH 13242 / PH 13242 (wall oven)
PH 12998, 13242: FCE3, range/wall-oven.
It lists the module as one possibility among several, after the network causes.
Possibly, if your current one has weak range. The page lists a failed router.
The page does not say it stops working.
The pages do not describe a wired option.
Code or symptom, part, service call
JennAir prints no bare FC. FC E1 to E9 are connected-appliance codes on ranges and wall ovens: E1 to E3 and E7 say the oven could not reach your router, E4 and E5 name the Wi-Fi antenna, E6 and E9 the Wi-Fi power module, and E8 is a registration entry error. Start with the home network.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
The Wi-Fi module links a connected JennAir oven to your router. FC E1 to FC E3 mean the appliance could not connect; FC E4 and FC E5 name the antenna; FC E6 and FC E9 name the power module. A router restart is the first owner step; the oven itself still bakes.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.