What it means
FEE6 on a JennAir freestanding range names the main cavity bake element or its wiring. Let the oven cool, reset the breaker for about a minute and see whether the range still heats from the bottom.
JennAir oven FEE6 / Heating element
FEE6 on a JennAir freestanding range names the main cavity bake element or its wiring. Let the oven cool, reset the breaker for about a minute and see whether the range still heats from the bottom.
Also shown as FEE6
FEE6 on a JennAir freestanding range names the main cavity bake element or its wiring. Let the oven cool, reset the breaker for about a minute and see whether the range still heats from the bottom.
Elements stay very hot; never touch them after a cycle.
FEE6 returns after the reset, or the oven will not heat.
Checks you have ticked / saved in this browser

Elements stay very hot; never touch them after a cycle.

With the oven cold, check the bake element for visible blisters or breaks. Do not pull on it.

Restore and watch.

Watch whether the oven reaches temperature at all.
Send the model and the checks you have already run, then begin your request from this page.
Book a visitA simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
On JennAir ranges, FEE6 names the main cavity bake element and FEE7 the main cavity broil element, each with its wiring.
Read the definitionIt is the heating element in the oven floor or cavity that does most of the work during baking. JennAir names the main cavity one, or the wiring, for FEE6.
Read the supporting manualSome ranges have more than one oven space. The page picks the main one.
Read the supporting manualFEE7 names the main cavity broil element. FEE6 is about baking.
Read the supporting manualStop using it and book a visit. Elements and their connections carry full line voltage.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2025-01-08; PH 13468 / PH 13468 (range)
PH 13468: FEE6, range.
The page lists the element or wiring as possible trouble spots. A technician tests which.
No. It is wired to the supply and the job needs the right part.
Possibly. Test cautiously.
A weak element can do that, but the page does not say.
Code or symptom, part, service call
FEE7 on a JennAir freestanding range names the main cavity broil element or its wiring. Let the oven cool, reset the breaker for about a minute and test with a short broil only if the oven otherwise behaves.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
On JennAir ranges, FEE6 names the main cavity bake element and FEE7 the main cavity broil element, each with its wiring. The pages offer one owner step: a one-minute breaker reset. An element that stays cold afterwards needs a technician with the power off.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.