What it means
INSERT MILK CONTAINER! means the milk container is missing or incorrectly positioned. Insert it correctly, pushing it in as far as it will go.
JennAir coffee machine INSERT MILK CONTAINER! / Milk system
INSERT MILK CONTAINER! means the milk container is missing or incorrectly positioned. Insert it correctly, pushing it in as far as it will go.
Also shown as INSERT MILK CONTAINER!
INSERT MILK CONTAINER! means the milk container is missing or incorrectly positioned. Insert it correctly, pushing it in as far as it will go.
It may still be in the refrigerator after cleaning.
The message stays with the container fully inserted.
Checks you have ticked / saved in this browser

It may still be in the refrigerator after cleaning.

JennAir's page says to insert it correctly and push it fully.

The frother cleaning page has the spout pushed down against the container, so look that it sits properly.
The prompt should clear once the machine detects the container.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit



A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.
The milk container is missing or incorrectly positioned.
Read the supporting manualInsert the container correctly, pushing it in as far as it will go.
Read the supporting manualJennAir's frother cleaning page notes milk should not be left out of the refrigerator for more than 15 minutes, so return a container you removed.
Read the supporting manualIf a fully seated container still triggers the prompt, the sensing or connection needs checking.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2021-04-27; PH 2759 / PH 2759 (built-in coffee maker)
Scope: JennAir built-in coffee maker. Read from the JennAir Product Help message page for this code and checked against the overview page of display messages (November 2026).
It connects to the milk system at the machine. Push it in until it stops, as JennAir says.
The machine may not start a milk drink, but JennAir's page does not say whether plain coffee still works.
The container comes out for cleaning and the prompt shows when it is not fully back.
JennAir's frother cleaning page says not to leave milk out of the refrigerator for more than 15 minutes.
Code or symptom, part, service call
PRESS CLEAN BUTTON is the prompt that starts frother cleaning. Put a container under the milk spout and hold CLEAN on the milk container lid for at least 8 seconds; do not release until the progress bar finishes.
A display prompt halts brewing until you fix the condition: refill and seat the tank for FILL TANK, empty the grounds container, reseat the brewing unit, close the service door, or adjust a too-fine grind. DESCALE needs the descaling cycle. GENERAL ALARM means clean the inside.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.