JennAir microwave E03 / Keypad

JennAir microwave
error E03

Microwave / display reference

With E03 the control board received a problem report from the keypad, which JennAir also calls the user interface. The keypad or its wiring may be the cause. Turn off the breaker that serves the microwave, leave it a full minute, then switch it back on and see whether E03 returns.

Also shown as E03

Last reviewed

Microwave / display reference
Meaning
With E03 the control board received a problem report from the keypad, which JennAir also calls the user interface. The keypad or its wiring may be the cause. Turn off the breaker that serves the microwave, leave it a full minute, then switch it back on and see whether E03 returns.
Who handles it
Reset, then book
Related codes
Source
E03 - Error Code - Over-the-Range Microwave - Product Help | JennAir

What JennAir microwave E03 means.

What it means

With E03 the control board received a problem report from the keypad, which JennAir also calls the user interface. The keypad or its wiring may be the cause. Turn off the breaker that serves the microwave, leave it a full minute, then switch it back on and see whether E03 returns.

What you can safely check

Leave it off for sixty seconds before turning it on again.

When to call a technician

E03 returns after the reset.

Checks you have ticked / saved in this browser

Safe checks, in order.

0 of 4 checks done
  1. JennAir microwave E03: A fingertip pressing a flat touch button on the glass control panel of a built-in microwave, with lit display marks above the buttons.
    Illustration. Follow your model’s instructions.
    Before you begin

    Switch the microwave breaker off

    Leave it off for sixty seconds before turning it on again.

  2. The black glass control strip of a built-in wall oven above its stainless handle
    Illustration. Follow your model’s instructions.
    Check 2

    Keep the display in view

    JennAir asks you to confirm the code does not come back during the first minute.

  3. Over the shoulder view of a person holding a tablet with a blank checklist, a refrigerator behind.
    Illustration. Follow your model’s instructions.
    Check 3

    Try a few keys

    Verify microwave operation after the reset.

  4. A technician reading a built-in oven display
    Illustration. Follow your model’s instructions.
    Check 4

    Note how the keypad feels

    Dead keys, ghost presses or no beeps all help a technician.

Still showing E03?

Send the model and the checks you have already run, then begin your request from this page.

Book a visit

Microwave control.

Conceptual Microwave sectionKeypadControl boardHumidity sensorWiring1234
  1. 4Wiring

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Parts behind the message.

Fingertip pressing one key on a blank black keypad beside the door handle of an over-the-range microwave.

Component reference

Microwave keypad

The keypad is the key panel on the front of a JennAir over-the-range microwave.

Read the definition

A little more context.

What does E03 mean on a JennAir over-the-range microwave?

The control board received a problem report from the keypad, which JennAir calls the user interface.

Read the supporting manual

What should I try first?

Turn the microwave breaker off for sixty seconds, switch it on, and keep an eye on the display for the first minute.

Read the supporting manual

How is E03 different from F9Q1?

F9Q1 points at the touch pad failing to run a function. E03 is the keypad report to the board.

Read the supporting manual

The manual behind the message.

Manufacturer document

E03 - Error Code - Over-the-Range Microwave - Product Help | JennAir

JennAir Product Help (producthelp.jennair.com)

dateModified 2021-04-27; PH 9580 / PH 9580 (over-the-range microwave)

Scope: JennAir over-the-range microwave. Read from the JennAir Product Help page for this code in the over-the-range microwave error code tree (November 2026).

Here to help

Good questions.
Clear answers.

Talk to our team
What causes E03?

The control board received a problem report from the keypad. JennAir names the keypad and its wiring as possible sources.

Is E03 the same as SE?

They overlap but are separate entries. Both point at the keypad and wiring.

Can I use the microwave with E03?

Try the breaker reset first. If the code stays or keys misbehave, leave the microwave unused and arrange a visit.

Will a reset fix it?

It might clear a brief glitch. Repeats need a technician.

Let’s take care of it.

Something on the display?
Send us the details.