What it means
F3H1 says there may be a problem with the humidity sensor or the associated wiring. Turn the microwave breaker off for a minute, switch it back on, and keep the oven in view for the next minute.
JennAir microwave F3H1 / Sensors
F3H1 says there may be a problem with the humidity sensor or the associated wiring. Turn the microwave breaker off for a minute, switch it back on, and keep the oven in view for the next minute.
Also shown as F3H1
F3H1 says there may be a problem with the humidity sensor or the associated wiring. Turn the microwave breaker off for a minute, switch it back on, and keep the oven in view for the next minute.
Leave it off for a minute, then switch it on.
F3H1 returns after the reset.
Checks you have ticked / saved in this browser

Leave it off for a minute, then switch it on.

Confirm F3H1 does not return in the first minute.

Run a normal cycle.

The page does not link the sensor to a feature, so record what you were doing.
Send the model and the checks you have already run, then begin your request from this page.
Book a visitA simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
F3H1 on a JennAir over-the-range microwave points at the humidity sensor or wiring leading to it.
Read the definitionJennAir's entry points to the humidity sensor or its wiring.
Read the supporting manualSwitch the breaker off for a minute, turn it back on and keep the oven in view for a minute.
Read the supporting manualF3T3 concerns the sensor that reads hood temperature, not humidity.
Read the supporting manualWhen F3H1 repeats after the reset.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2021-04-27; PH 9608 / PH 9608 (over-the-range microwave)
Scope: JennAir over-the-range microwave. Read from the JennAir Product Help page for this code in the over-the-range microwave error code tree (November 2026).
The humidity sensor and its associated wiring.
They share the F3 prefix, but F3T3 and F3T4 name thermistors.
The page does not say. A technician confirms on site.
It clears a one-off. If F3H1 returns, book a visit.
Code or symptom, part, service call
F3T3 points at the thermistor that reads hood temperature, or at its wiring. Shut off the microwave breaker for a minute, switch it on, and keep the oven in view for a minute.
First confirm the controls: enter Cook Time, then Cook Power if it is not 100%, and press Start. Then test with one cup of water for one minute on HI. If heat rise is detected, the microwave is heating. With no power at all, check the breaker or fuse.
F3H1 on a JennAir over-the-range microwave points at the humidity sensor or wiring leading to it. The sensor is the part behind sensor-based cooking. JennAir's only step is a sixty-second power cut, then power back on to see if the code returns.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.