What it means
FC E5 repeats the Wi-Fi antenna wording of FC E4 on a JennAir range or wall oven. Reset the breaker for about a minute and, if the code returns, plan a technician visit; the router is not the cause.
JennAir oven FCE5 / Wi-Fi hardware
FC E5 repeats the Wi-Fi antenna wording of FC E4 on a JennAir range or wall oven. Reset the breaker for about a minute and, if the code returns, plan a technician visit; the router is not the cause.
Also shown as FCE5
FC E5 repeats the Wi-Fi antenna wording of FC E4 on a JennAir range or wall oven. Reset the breaker for about a minute and, if the code returns, plan a technician visit; the router is not the cause.
Another device should connect near the oven, which rules out the network.
FC E5 returns after the reset.
Checks you have ticked / saved in this browser

Another device should connect near the oven, which rules out the network.

Restore power and wait for the oven to start.

If it does not, connected features are affected.

Give your model number too.
Send the model and the checks you have already run, then begin your request from this page.
Book a visit

A simplified drawing, because layouts change with the model. Tap an outlined part to see a photo and the related check.

Component reference
The Wi-Fi module links a connected JennAir oven to your router.
Read the definitionThe Wi-Fi antenna or the associated wiring, the same as E4.
Read the supporting manualJennAir does not say. There may be more than one connection to check, but that is our guess, not the page's.
Read the supporting manualThe page gives no limits. Baking and broiling do not depend on Wi-Fi, but a connected feature may be unavailable.
Read the supporting manualIf the code repeats after the reset.
Read the supporting manualManufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-08-16; PH 13000 / PH 13000 (range)
Manufacturer document
JennAir Product Help (producthelp.jennair.com)
dateModified 2024-11-08; PH 13244 / PH 13244 (wall oven)
PH 13000, 13244: FCE5, range/wall-oven.
The wording is identical: the Wi-Fi antenna or its wiring. JennAir does not say why there are two numbers, so handle E5 like E4, with a breaker reset and a visit if it returns.
Follow your owner's manual for the connected-features settings, since the page gives no steps. Baking and broiling do not depend on Wi-Fi, but connected features may be unavailable while the code shows.
If your unit is under the manufacturer's warranty, the manufacturer handles that repair. Otherwise book a visit with us and tell us whether the app still connects.
The Wi-Fi antenna or the associated wiring, the same as FC E4. Nothing else is printed, so a technician has to inspect the oven to tell which one it is.
Code or symptom, part, service call
JennAir prints no bare FC. FC E1 to E9 are connected-appliance codes on ranges and wall ovens: E1 to E3 and E7 say the oven could not reach your router, E4 and E5 name the Wi-Fi antenna, E6 and E9 the Wi-Fi power module, and E8 is a registration entry error. Start with the home network.
JennAir says not to judge oven temperature with a thermometer, because the elements cycle and most thermometers react too slowly. Check preheat time, racks, pan spacing and foil first, then run the biscuit test before any calibration.
The Wi-Fi module links a connected JennAir oven to your router. FC E1 to FC E3 mean the appliance could not connect; FC E4 and FC E5 name the antenna; FC E6 and FC E9 name the power module. A router restart is the first owner step; the oven itself still bakes.
Schedule a diagnostic for your model, carried out at the appliance.
Office details, plus the access notes to pass along.