
Independent care for JennAir kitchens
JennAir repair,ovens to columns.
JennAir wall ovens, steam ovens, column refrigeration, cooktops and dishwashers, repaired in 9 US metro areas.



Premium cooking,
calmly maintained.
F-codes and more
A letter, a number.
A meaning you can read.
JennAir ovens, dishwashers and refrigerators print many codes. Look yours up in plain language before you decide what to do next.
JennAir error codesF9 on a JennAir wall oven most often means the oven was wired wrongly at the home supply or the hard-wire connection, with L2 and N swapped as the example; a steam oven page gives only a reset. Call an electrician before using the oven again.
Read the F9 checks201 researched oven codes. Each model reads codes its own way, so go by your own manual.
Cooking and cooling
Oven, steam, column.
Each one covered.












Tell us the symptom.
Leave the rest to us.
What happens on a visit.
No surprises in your kitchen.
1Share the details
Tell us which appliance, what the display shows and where it is installed. A photo of the model plate helps.
2Find the cause
The technician inspects the unit, explains the likely cause and agrees the cost with you before starting.
3Check and explain
When the work is done, the technician tests the appliance and walks you through what was fixed.
Ovens explained.
Columns too.
All JennAir guides
Fan, element, sensor. The parts behind the door.
Built-in appliance terms
Inside the cabinet.
- Oven temperature sensor
- JennAir Product Help ties F1, F2 and several F3 codes to the oven temperature sensor, the control or the wiring between them. The sensor reports cavity heat to the control. The help pages pair it with the control, so one reset is the only owner step.
- Dishwasher drain motor and hose
- JennAir F9E1 is "Long Drain" and F9E2 is "Drain motor error". Before booking, check the drain hose, the disposer knockout plug, the filter and the high loop. These setup problems cause most of the draining complaints the help pages describe.
- Refrigerator water filter
- JennAir recommends replacing the refrigerator water filter every 6 months, when the indicator light comes on, or as needed. A clogged or badly seated filter can slow water flow, thin the ice or stop ice. After changing it, you must reset the status light on most models.

Service near you
Nine regions.
One standard of care.
- Tampa Bay
- Orlando
- Miami / South Florida
- New York Metro
- Houston
- Chicagoland
- Los Angeles
- San Diego
- SF Bay Area
A clear price, before the work.
Before any work begins, the technician tells you what is needed and settles the cost with you. A built-in appliance may need to be examined on site before that figure is firm.
Care we stand behind.
If JennAir's manufacturer warranty covers the repair, JennAir itself does the work. We back our own workmanship with a warranty.
Do you have any link to JennAir?
No, we are an independent repair business. JennAir has not sponsored or endorsed us, and we make no claim to speak for it.
Can you service a steam oven?
Yes, steam ovens are on our list, along with standard wall ovens. Scale in the water path and a failing steam generator are two causes we see, so tell us how it behaves.
Does JennAir use the same codes as Maytag and KitchenAid?
Several appear to match across sister brands, though meaning can depend on the model. Send us the exact characters on your display and the model plate, and we will sort out the right one.
My column refrigerator is warm but the lights work. What now?
Check that the doors close squarely and nothing blocks the air path. If the temperature keeps drifting, a technician can check the cooling system and the control board in the cabinet.
Is my JennAir covered by a warranty?
Perhaps. JennAir itself handles repairs that fall under the manufacturer's warranty, so contact the company first. After that, our service stands behind its workmanship with a warranty.


